DECKEL MAHO DMU80FD
DECKEL MAHO DMU80FD
Description
5-AXIS MACHINING CENTERS DMU80FD SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: One used 2003 DECKEL MAHO DMU80FD hi-dyn 5-AXIS MILL-TURN CENTRE: Made in Pfronten, Germany This machine is capable of simultaneous 5-axis and 5-sided machining because of the universal swivel head which moves continuously between vertical and horizontal spindle positions. The turning feature of this machine is ideal for large and heavy parts. Spindle Hours Only 9,898 original spindle on hours before spindle rebuild NOTE SPINDLE WAS REBUILT BY SETCO 12/2013 AT A COST OF $17,000.00 ! Millplus iT CNC Control with electronic handwheel -WORKING RANGE- -MAXIMUM WORKPIECE CONTOUR FOR ROTATION-SYMMETRICAL PARTS- -MILL-TURN TABLE- Table has integrated balancing sensor -5TH AXIS MILLING SPINDLE- NC Controlled B axis milling head. 2 seconds swivel time Hor.-Vert. Head swivels from horizontal to vertical & vertical to horizontal position In addition head has a NC Controlled swivel range from vertical position 0 degrees to the left -7 degrees (in direction of tool magazine) and to the right to horizontal position +180 degrees=3D187 degrees total swivel range. -MAIN SPINDLE DRIVE- -FEED DRIVES- -30 POSITION VERTICAL CHAIN TOOL CHANGER- -COOLANT PUMP- -COOLANT THRU THE SPINDLE- -WEIGHT- Load on machine base including 2 x workpiece weight 21,728 lbs (9.7 tons) -EQUIPPED WITH- Oil & Emulsion mist separator BLUM Laser tool length measuring and broken tool detection RENISHAW infrared parts measuring probe Chip conveyor
Specifications
| Manufacturer | DMG MORI |
| Model | DMU80FD |
| Year | 2003 |
| Condition | Used |
| Stock Number | 063965 |
| Status | Available |
| Number of axis | 5-Axis Simultaneous |
| Tool changer | 30 ATC |
| Control | Millplus iT |
| Spindle | 12,000 rpm |
| Spindle taper | HSK-A63 |
| X axis | 31.5" (800 mm) |
| Y axis | 27.6" (700 mm) |
| B axis | 0-180 degrees |
| Z axis | 23.6" (600 mm) |
| C axis | 360 x 0.001 degrees |
| Power on hours | Only 27,194 total power on hours |
| Spindle hours since rebuild | Approximately 200 hours |
| X axis (longitudinal) | 31.5" (800 mm) |
| Y axis (transverse) | 27.6" (700 mm) |
| Z axis (vertical) | 23.6" (600 mm) |
| Volume machining area | 336 dm-3 |
| Maximum diameter | 36.2" (920 mm) |
| Maximum weight | 1,764 lbs (800 kg) |
| Nc rotary table clamping surface | 31.5" diameter (800 mm) |
| Cross slot/t-slots h7/h12 | 14 |
| Nc rotary table maximum load | 1,764 lbs (800 kg) |
| Drive power table 40% ed | 30.8 HP (23 kW) |
| Maximum table speed turning | 500 RPM |
| Maximum torque 100% ed | 1,180 lb/ft (1,600 Nm) |
| Maximum holding momentum 100% ed | 3,688 lb/ft (5,000 Nm) |
| Rotation range of table | 360 x 0.001 degrees (full 4th axis) |
| Type | Brushless AC/Digital |
| Power 40% duty cycle (s3) | 38.9 HP (29 kW) |
| Power 100% duty cycle (s1) | 25.5 HP (19 kW) |
| Speed range (spindle) | 20-12,000 rpm |
| Maximum spindle torque | 95.9 lb ft (130 Nm) |
| Spindle bearing diameter front/rear | 3.15"/2.16" (80/55 mm) |
| Clamping power | 25 kN |
| Feed rate | 0.04-590 IPM (1-15,000 mm/min) |
| Rapid feed (x-y-z) | 1,574 IPM (40 m/min) |
| Acceleration (x-y-z) | 5.0 m/s-2 |
| Feed power (x-y-z) | 10 kN |
| Ballscrews x/y/z | 40x20/40x20/40x20 mm |
| Number of pockets | 30 |
| Maximum tool weight | 22 lb (10 kg) |
| Maximum tool diameter without free pockets | 3.94" (100 mm) |
| Maximum tool diameter with free pockets | 6.3" (160 mm) |
| Maximum tool length turning/milling | 13.8" (350 mm) |
| Maximum tool length with breakage control | 12.2" (310 mm) |
| Pump output external jets | 10.6 gallon/minute (40 liter/minute) |
| Pump pressure external jets | 21.76 PSI (1.5 bar) |
| Pump output chip rinsing | 47.55 gallon/minute (180 liter/minute) |
| Tank volume | 158 gallon (600 liter) |
| Capacity | 6.07 gallon/minute (23 liter/minute) |
| Pressure | 580 PSI (40 bar) |
| Form | Centre of the spindle |
| Machine weight with table | 19,936 lbs (8.9 tons) |