DMG MORI DECKEL MAHO DMU60 monoBLOCK
DMG MORI DECKEL MAHO DMU60 monoBLOCK
orCall +1 262-320-3399
Description
5-AXIS MACHINING CENTERS
DECKEL MAHO DMU60 monoBLOCK
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
Used 2006 DMG MORI DECKEL MAHO DMU60monoBLOCK 5-Axis simultaneous VMC:
Machine was manufactured at DECKEL MAHO Pfronten GmbH-Pfronten, Germany
May be inspected under power in our Wisconsin showroom by appointment
-CONTROL-
Heidenhain iTNC 530 3-D control with 15" TFT screen & Electronic Handwheel
-WORK AREA-
Max workpiece size 26.77" (680 mm) dia x 29.53" (750 mm) height x 1,102lbs
-FEED DRIVES-
-TOOL MAGAZINE-
-HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM-
-HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM-
-EQUIPPED WITH-
Fully enclosed protection cabin
Integrated Rotary Table
18,000 RPM Motor Spindle with Active Cooling
NC-Controlled Simultaneous Swivel Milling Head(B-Axis) with Active Cooling
Swivel Range (0 is Vertical/-90 is Horizontal) -120.100/+30.100 Degrees
HEIDENHAIN TS649 infrared parts measuring touch probe
Chip auger
External flood coolant on outside of spindle
1 bar (14.5 PSI) pressure, 40L/Min (10.6 gallon/min) flow rate
250L (66 gallon) capacity coolant tank
Specifications
| Manufacturer | DMG MORI |
| Model | DECKEL MAHO DMU60 monoBLOCK |
| Year | 2006 |
| Condition | Used |
| Stock Number | 064373 |
| Status | Available |
| Number of axis | 5-Axis |
| Tool changer | 24 ATC |
| Control | HH iTNC 530 |
| Spindle | 18,000 rpm |
| Spindle taper | CAT40 |
| X axis | 28.74" (730 mm) |
| Y axis | 22.05" (560 mm) |
| B axis | -120.100/+30.100 degrees |
| Z axis | 22.05" (560 mm) |
| C axis | 360 x 0.001 degrees |
| Traverse path x (longitudinal) | 28.74" (730 mm) |
| Traverse path y (across) | 22.05" (560 mm) |
| Traverse path z (vertical) | 22.05" (560 mm) |
| Type | Brushless AC/Digital |
| Rapid traverse linear axes x/y/z | 1,181 ipm (30 m/min) |
| Ballscrews x/y/z | 40 x 20 mm/40 x 20 mm/50 x 20 mm |
| Application | Vertical |
| Type of gripper | Pick Up |
| Number of tool stations | 24 |
| Max tool weight | 17.6 lbs (8 kg) |
| Max tool diameter without free side pockets | 3.15" (80 mm) |
| Max tool diameter with free side pockets | 5.12" (130 mm) |
| Max tool length | 12.4" (315 mm) |
| Input resolution | 0.001 mm |
| Table clamping surface | 23.62" (600 mm) Diameter |
| Maximum load table center | 1,102 lbs (500 kg) |
| Rigid table clamping surface | 39.4" x 23.6" (1,000 mm x 600 mm) |
| Rigid table maximum load | 1,543 lbs (700 kg) |
| Type of main drive | AC |
| Drive power 100% dc | 25.5 HP (19 kW) |
| Drive power 40% dc | 37.5 HP (28 kW) |
| Max spindle torque 100% dc | 60.5 Ft/Lb. (82 Nm) |
| Max spindle torque 40% dc | 89.2 Ft/Lb. (121 Nm) |
| Speed range | 20-18,000 RPM |
| Acceleration from 0-18,000 rpm | 2.2 Seconds |
| Number of gear steps | None |
| Spindle bearing diameter front/rear | 3.15"/2.36" (80/60 mm) |